Toshiba TDP-P75 - Manual (Page 22)

Overview 22
English
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation
locations:
1.
Floor in front of screen;
2. Ceiling in front of screen;
3. Floor at rear of screen;
4. Ceiling at rear of screen.
Your room layout or personal preference will dictate which installation location you
select. Take into consideration the size and position of your screen, the location of
a suitable power outlet, as well as the location and distance between the projector
and the rest of your equipment.
WARNING
• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS
when placing the unit. Attempting to clean/replace the lamp at a high site by
yourself may cause you to drop down, thus resulting in injury.
• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do
so. Mounting the projector on a ceiling requires special ceiling brackets (sold
separately) and specialized knowledge. Improper mounting could cause the
projector to fall, resulting in an accident.
I. Floor front:
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position.
II. Ceiling front:
Select this location with the projector suspended
from the ceiling in front of the screen.
Set in the Default setting > Projection mode
menu after you turn the projector on.
III. Floor rear:
Select this location with the projector placed near
the floor behind the screen.
Set in the Default setting > Projection mode
menu after you turn the projector on.
IV. Ceiling rear:
Select this location with the projector suspended
from the ceiling behind the screen.
Set in the Default setting > Projection mode
menu after you turn the projector on.