Toshiba TDP-P75 - Manual (Page 21)

Overview 21
English
Operating a computer using the remote
control
A computer can be operated using the projector’s remote control. This function is
available on any computer with the Windows 98/98SE, Windows Me, Windows
2000, or Windows XP OS, that is equipped with a USB port supporting the USB
1.1 (The mouse remote control is supported on OS 9 or OS X for the Macintosh).
The operation cannot be guaranteed for all the environments of computers.
Connecting a computer
Connect the supplied Mouse remote control receiver to the computer.
Operating a computer
The mouse remote control function is available when the remote control is set to
[PC Mode]. (See “Switching operation modes”.)
Point the Mouse remote control at the mouse remote control receiver, and
operate the remote controlfs buttons.
• Moving the mouse pointer
Move the pointer control button in the direction that you wish the mouse pointer
to move, then press.
• To left click
Press the L-CLICK button.
• To right click
Press the R-CLICK button.
• To drag and drop
Move the pointer control button in a (L-)clicked state, then when the pointer is
over the desired location, release the button.
• Using the computer’s up and down arrow key functions
Press the and buttons to switch PowerPoint® slides.
1
To USB port
Mouse remote control receiver
2
ENTER
R-CLICK
RETURN
ESC
Remote Control Front Remote Control Rear
Pointer control
R-CLICK
R-CLICK