Toshiba TDP-P75 - Manual (Page 20)

Overview 20
English
Preparing and using the remote control
(Continued)
Q Switching operation modes
Operation modes should be switched between projector operation and computer
operation.
Notes
• With the exception of operating a PC with the remote control, all buttons are
used in [PJ Mode].
• Make sure there is nothing between the remote control and the IR sensor on the
projector that might obstruct the infrared beam.
PJ MODE
ESC
R-CLICK
INPUT AUTO MENU
FREEZE
Switching the remote control operation mode.
Pressing this button toggles the mode.
When this button is lit, the remote control is in [PJ Mode]
(Projector operation mode).
If no operations are made for 30 seconds, this light goes out,
and the remote switches back to [PC Mode] (Computer
operation mode).
[PJ Mode] : Functions as a select button.
If no menu is displayed, adjusts volume.
[PC Mode] : Functions as a mouse pointer control.
Pressing displays a laser pointer, regardless of the mode.
[PC Mode] : Functions as a down button. Used to go forward
on Microsoft® PowerPoint® slides, etc.
[PC Mode] : Functions as an up button. Used to go back on
Microsoft® PowerPoint® slides, etc.
[PC Mode] : Functions as the right mouse button (R-CLICK).
[PC Mode] : Functions as a ESC button.
Pressing one of these buttons automatically sets the remote
control to [PJ Mode].
If no operations are made for 30 seconds, and the remote
switches back to [PC Mode].
The L-CLICK (left click) button on the back of the remote
control functions when in [PC Mode].