Outback Power Systems GS8048 - Manual (Page 5)

Important Safety Instructions
900-0021-01-00 Rev A 3
Table 1 Terms and Definitions
Term Definition
System display Remote interface device (such as the MATE3), used for monitoring, programming and
communicating with the inverter; also called “remote system display”
UL Underwriters Laboratories; refers to a set of safety standards governing electrical
products
Utility grid The electrical service and infrastructure supported by the electrical or utility company;
also called “mains”, “utility service”, or “grid”
General Safety
WARNING: Limitations on Use
This equipment is NOT intended for use with life support equipment or other medical
equipment or devices.
CAUTION: Equipment Damage
Only use components or accessories recommended or sold by OutBack Power
Technologies or its authorized agents.
IMPORTANT:
Do not attempt to install this equipment if it appears to be damaged in any way. See
the Warranty section for instructions on returning the equipment.
Personal Safety
WARNING: Personal Injury
 This equipment weighs in excess of 125 lbs ( 57 kg). Use safe lifting techniques
when lifting this equipment as prescribed by the Occupational Safety and Health
Association (OSHA) or other local codes.
 Use standard safety equipment such as safety glasses, ear protection, steel-toed
safety boots, safety hard hats, etc., as prescribed by the Occupational Safety and
Health Association (or other local codes) when working on this equipment.
 Use standard safety practices when working with electrical equipment (e.g., remove
all jewelry, use insulated tools, wear cotton clothing, etc.).
 Never work alone when installing or servicing this equipment. Have someone
nearby that can assist if necessary.