Sylvania NB500SL9 - Manual (Page 28)

26 EN
SPECIAL PLAYBACK
A-B Repeat
You can play back the specific part (between point A and
point B) repeatedly.
1 During playback, press [A-B] at the
desired starting point A.
2
During playback, press [A-B] at the
desired ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
To cancel the A-B repeat, press [A-B] again.
Note
Point B should be set within the same title or track as
point A.
A-B repeat is not available with some scenes.
To cancel the A point which was set, press [CLEAR].
A-B repeat does not function during chapter, title,
track, group or all repeat playback. •
•
•
•
PIP (Picture in Picture) Setting
Some BD-video have the PIP (picture-in-picture) function
which enables you to display the secondary video in the
primary video. You can call up the secondary video by
pressing [PIP] whenever the scene contains the
secondary video.
primary
video
secondary
video
1 During playback, press [PIP].
PIP information will appear.
2
Use [K / L] to select the secondary video
you want.
The secondary video will be displayed and the
secondary audio will be output.
3
Press [RETURN ] or [PIP] to remove the
PIP information.
Note
The the secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HD Audio Output”. Refer to
“Switching Audio Soundtrack” on page 29 and
“Setting the BD Audio Mode” on page 30. •
•
•
Program Playback
You can play back the disc in your desired order.
1
In stop mode, press [MODE].
The program screen will appear.
2 Use [K / L] to select a track / file, then
press [ENTER].
e.g.) audio CD
Program
CD-DA Total 0:09:49
1
2
3
4
5
6
7
3:40
2:33
2:22
2:28
2:45
3:41
2:58
6 3:41
1 / 3 1 / 1
1
4
6 3:40
2:28
3:41
For JPEG files, use [K / L] to select a folder, then
press [ENTER] first, and then use [K / L] to select a
file, then press [ENTER].
Press [CLEAR] to erase the last file of the program.
Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
The programmed tracks / files is displayed in the
right hand screen.
If the entire program cannot be displayed on the TV
screen, “L” or “K” appears.
Use [s / B] to go back forward between the
hierarchy of folders.
If 8 or more tracks / files were set in a program, use
[SKIP H / G ] to see all the tracks / files.
3 Press [PLAY B ] to start program
playback.
Program playback will start.
Note
During program playback, press [STOP C ] once to
set the resume point, and then press [PLAY B ] to
resume program playback from where [STOP C ]
was pressed (audio CD) or from beginning of the file
where [STOP C ] was pressed (JPEG).
During program playback, press [STOP C ] twice to
display the program screen. To go back to the
normal program playback, press [RETURN
] to exit
from the program screen, then press [PLAY B ].
If you open the disc tray, remove the SD Memory
Card or turned off the power, the program will be
cleared.
Up to 99 tracks / files can be entered.
To repeat the current track / file in the program,
press [REPEAT] repeatedly until “
Track”
appears during play back. To repeat the entire
program, press [REPEAT] repeatedly until “
All”
appears during playback.
Playback from a desired track / file and random
playback are not available during program playback.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
E5H40UD_NB500SL9_EN.indd 26 E5H40UD_NB500SL9_EN.indd 26 2008/04/14 13:57:27 2008/04/14 13:57:27