Basic playback – Sylvania NB500SL9 User Manual
Page 22
20
EN
BASIC PLAYBACK
HDMI
CLEAR
A-B
MODE
PAUSE
REV
PLAY
FWD
SUBTITLE
AUDIO
DISPLAY
SEARCH
STOP
RED
GREEN
BLUE
YELLOW
POWER
OPEN/
CLOSE
ENTER
PLAY
STOP
1
Press
[POWER].
2
Turn on the TV and select the
appropriate input on the TV to which
the unit is connected.
3
Press [OPEN / CLOSE A ] to open the
disc tray.
4
Place the disc on the disc tray with its
label side facing up.
Align the disc to the
disc tray guide.
5
Press [OPEN / CLOSE A ] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6
Press
[PLAY
B
] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
In this case, use [K / L / s / B] to select the
desired item, then press [ENTER].
7
Press
[STOP
C
] once to stop
playback temporarily.
Refer to “Resume Playback” on page 21.
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray,
then remove the disc before turning off the unit.
Note
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
The operation may vary when you play back
BD-video and DVD-video with disc menu. Refer to
the manual accompanying the disc for details.
•
•
•
Playback
E5H40UD_NB500SL9_EN.indd 20
E5H40UD_NB500SL9_EN.indd 20
2008/04/14 13:57:17
2008/04/14 13:57:17