Oki 87 - Manual (Page 85)

Programming 73
2 Press the 9/USER PROG. One-Touch key. The display shows
1:FUNC. PROGRAMMING.
3 Press
YES
. The display shows FUNCTION NO. [ ].
4 Using the numeric keypad, enter 12. The display shows DISTINC-
TIVE RING, [OFF].
5 Press
NO
. The display changes to DISTINCTIVE RING, [ON].
6 Press
YES
. The display changes to SETUP FAX RING, CALL
FAX NUMBER NOW.
7 Using a separate telephone line, immediately dial the number
assigned to the fax machine (you must do this within 90 seconds).
When your MFP machine begins to ring, it automatically detects and
remembers its assigned ring pattern. When it has finished program-
ming its ring pattern, the display shows RESULT=OK.
Tip: Occasionally, your MFP machine may not be able to detect its
ring pattern on the first try. If this happens, the display shows
RESULT=NG. Follow the instructions again from Step 6.
8 Press
YES
to confirm your selection.
9 Press the SELECT FUNCTION key to finish.
Personal Box Programming (Polling)
9/SPACE
5:PERSONAL BOX PRG.
YES(
) NO ( /1-8)
+ +
JKL
5
USER
PROG.
SELECT
FUNCTION
1 Press the SELECT FUNCTION key.
2 Press the 9/USER PROG. One-Touch key. The display shows 1:
FUNC. PROGRAMMING.
3 On the numeric keypad, press 5. The display shows 5: PERSONAL
BOX PRG.
4 Press
YES
. The display shows PERSONAL BOX NO. [ ].
5 On the numeric keypad, enter a personal box number (from 1 ~ 8).
6 Press
YES
. The display shows PERSONAL BOX [CLOSE].
7 Press
NO
. The display switches between [CONF], [POLL],
[CLOSE] in that order.
8 When the display shows [POLL], press
YES
. This sets up your
personal box number for Polling.