Oki 87 - Manual (Page 21)

Components 9
18 One-Touch Keypad: For a description of all the functions of the
One-Touch keypad, see the next section, “The One-Touch Key-
pad.” below
19 One-Touch Labels: After programming a location into a
One-Touch key, write the location’s name on the One-Touch label.
Lift off the plastic cover above the One-Touch label, use a pencil to
write in the name, then replace the cover.
20 # Key: Once you have programmed some One-Touch keys or
Auto Dial numbers, use this key to create groups to allow you to
send the same fax to multiple locations. After you have loaded a
document, use this key to select the group you want to send your
fax to.
21 0/UNIQUE Key: When dialing, use this key to enter a “0.” When
programming your Sender ID or a Location ID, you can use this
key to enter a variety of unique characters, including: ! @ \ “ _ % ~
# & ‘ ( ) * + , - . / : ; = ? · д Я с ц ь Ж Е Ш ж е ш.
22 Numeric Keypad: When dialing, these 12 keys work just like the
keypad on a telephone. Also use the keypad to enter numbers,
letters and other characters while programming. After pressing the
SEARCH key, you can also use the numeric keypad to alphabeti-
cally search for the names of locations programmed into your MFP
machine.
23 * Key: If your MFP machine is set to pulse dialing, this key allows
you to switch the dialing operation of your MFP machine from
pulse to tone dialing during your current call. You can also use this
key while programming to create numbers with mixed
pulse-then-tone operation.