Oki 87 - Manual (Page 58)

46 OKIOFFICE 87 User’s Guide
Receiving Faxes in Memory
Your MFP machine automatically receives messages into memory (and
does not immediately print them) in a few different situations.
Memory Reception mode
When your MFP machine is set to Memory Reception mode, it receives
data into its memory without printing and the display shows MSG. IN
MEMORY.
Printing out a message stored in memory can be done in two ways:
(1) Switch to Auto Receive mode.
After disabling the Memory Reception mode, all messages stored
in memory print out.
(2) Print out Operation
Messages stored up in memory can also be printed out by the
following process:
PRINT MEMORY MSG. ?
YES(
) NO( )
+
SELECT
FUNCTION
PRINT
OPERATION
2
1 Press the SELECT FUNCTION key.
2 Press the 2/PRINT OPERATION One-Touch key. The display
asks PRINT MEMORY MSG?
3 Press
YES
. The stored message begins printing.
Tip: If a memory reception password has been set, you need to
enter your password.
No Paper Reception
When your MFP machine has run out of paper, a NO PAPER, REPLACE
PAPER message appears on the display. Even when your MFP machine
runs out of paper, it continues to receive faxes in memory.
Your MFP machine prints out any messages received in memory when
the paper is replaced.