Oki MC860n MFP User Manual
Page 80
Operation > 80
1
Others
(cont.)
FPolling
OFF, ON
To turn ON, use the numeric keypad to enter
the sub-address of the remote machine.
If required, use the numeric keypad to enter
the password of the remote machine.
F-Code Tx
OFF, ON
F Code transmission is a function to
communicate using sub addresses or
passwords in accordance with the standard
of ITU-T. by creating and registering F Code
boxes you can execute confidential
communication and notice board
communication.
Use the numeric keypad to enter the sub-
address.
If required, use the numeric keypad to enter
the password of the remote machine.
Note: up to 20 F code boxes can be
registered, Up to 30 documents can be
stored in one box.
Note: Polling and FPolling must be OFF.
Memory Tx
OFF, ON
Select OFF to enable real time transmission,
i.e. fax transmission synchronization with
scanning.
Dialling
Options
user defined
Use the numeric keypad to enter the fax
number. Allows you to add a prefix, pause,
tone, etc., for example if you are dialling an
“extension” number, add a pause between
destination number and the extension
number.
Press the Regist button to assign a fax
number to the speed dial list.
Auto Rx
OFF, ON
Your MFP is set to receive faxes
automatically, if you wish to change this to
manual receive select OFF.
Logout
If access control is enabled, logout once you
are finished to avoid any unauthorized
access.
NO.
FEATUR
E
OPTION
DESCRIPTION
1
2
3
4
5
6