Onkyo DV-CP802 - Manual (Page 42)

42
Advanced Playback—Continued
With the Last Memory function you can resume play-
back from where you left off even if another disc has
been selected or the disc has been removed. Last Mem-
ory also remembers the soundtrack and subtitle settings
you were using.
Notes:
• The Last Memory function can store the last point for
up to six DVD-Video discs. When you store the last
point for a seventh disc, the first disc’s setting is lost.
• The Last Memory function can remember the last
point for one VCD, but that will be lost when another
disc is selected.
• The Last Memory function may not work properly
with VCDs that support PBC.
• The Last Memory function will not work while a DVD
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVD-Video discs.
• If you select another disc, or inadvertently turn off the
DV-CP802 during playback, you can resume playback
from the same point by selecting the disc again.
You can display various information about the current
disc, title, chapter, group, or track onscreen and on the
DV-CP802’s display.
Using Last Memory
1 During playback, press the
[LAST M] button.
The last memory point for the disc is
stored, the LAST M indicator appears,
and “Last Mem” appears on the display.
If the [LAST M] button is pressed
again, the last memory point will be
updated.
2 To stop playback, press the Stop
[ ] button once or twice.
At this point you may choose to play
another disc, or to turn off the
DV-CP802.
ON STANDBY
SEARCH LAST M MEMORY CHAIN MODE
REPEAT
A-B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE
DISC 1 DISC 2 DISC 3 STEP/SLOW
CLEAR
OPEN/
CLOSE
ENTER
+10 0
1 2 3
4 5 6
7 8 9
STANDBY/ON
STANDBY
DISPLAY
LAST MEMORY
DISPLAY
LAST M
ENTER
STOP
PLAY/ENTER
DVD-V VCD
LAST M
Remote controller
Remote controller
3 To resume playback, select the
disc and press the Play [
] but-
ton.
The Last Memory dialog box appears,
as shown.
4 To resume playback from the last
memory point, select “Yes,” and
then press [ENTER].
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
Displaying Information
During playback, press the [DIS-
PLAY] button repeatedly.
The information displayed depends on
the type of disc. See the following
tables.
Remote controller
ENTER
Remote controller
DISPLAY
Remote controller