Onkyo DV-CP802 - Manual (Page 11)

11
Getting to Know the DV-CP802
For detailed information, refer to the pages in parenthe-
sis.
A STANDBY/ON button (21)
This button is used to set the DV-CP802 to On or
Standby.
Don’t turn on the power until you’ve completed and
double checked all of your connections (page 17).
B STANDBY indicator (21)
This indicator lights up when the DV-CP802 is in
Standby mode.
C VIDEO CIRCUIT OFF button & indicator (45)
This button is used to turn off all of the internal
video circuitry, eliminating the possibility of inter-
ference when playing audio-only discs. The button
lights up when the video circuitry is turned off.
D
LAST MEMORY button (42)
This button is used with the Last Memory function.
E
REPEAT button (35)
This button is used with the Repeat function.
F DIMMER button (32)
This button is used to adjust the display brightness.
G DISPLAY button (42)
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
H Display
See “Display” on page 12 for more information.
I Remote control sensor (16)
This sensor receives control signals from the remote
controller.
J Open/Close [ ] button (23)
This button is used to open and close the disc tray.
K DISC SELECT 1–6 buttons (24)
These buttons are used to select discs. Playback
starts automatically when discs are selected with
these buttons
L
Disc tray (23)
The disc tray has six bays for loading up to six discs.
M Disc tray light
This light illuminates the disc tray. It comes on
when the DV-CP802 is turned on, and is brighter
while the disc tray is open.
N
DISC SKIP button (23, 24)
This button is used to select the disc bays (i.e., rotate
the disc tray) when loading or removing discs, and
to select discs for playback.
O Previous [ ] button (27, 30)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current chapter or track.
P
Next [ ] button (27, 30)
This button is used to select the next chapter or
track.
Q
PAUSE [ ] button (25)
This button is used to pause playback.
R CHAIN MODE button (34)
This button is used with the Chain mode function.
S STOP [ ] button (25)
This button is used to stop playback.
T
PLAY/ENTER [ ] button (25)
This button is used to start playback and to cancel
fast forward and fast reverse. It’s also used to start
Chain mode playback.
Front Panel
STANDBY/ON
STANDBY
L M T S R Q P O N
B 7 8 9 J 6 5 4 3 K A