Oregon Scientific BPW810 User Manual

Page 12

3. Relax your hand and press to turn on the unit. A

voice message will remind you to relax and remain
still. It then begins inflating the wrist cuff. Once the
pressure reaches 180 mmHg, it will slowly deflate
until the measurement results show on the LCD.

NOTE

This unit can intelligently adjust the cuff

pressure and inflate to a higher-pressure level (>180
mmHg) when needed.

Your systolic and diastolic pressure readings flash on
the LCD, followed by MAP and pulse per minute
readings every 2 seconds. At the same time, your
measurement results and the blood pressure
classification will also be announced.

4. To repeat the announcement, simply press TALK /

VOLUME.

5. If you want to save the record to memory, press

and the results will be saved to User 1's

or User 2's memory accordingly.

The measurement is stored as the first (MEM 1) entry
in the user record you selected; the last entry (MEM
60) is dropped, and all the entries in between move up
1 digit (e.g. 58 becomes 59, and so on).

RECALLING MEASUREMENTS STORED IN MEMORY

To view a history of User 1's records, press

To view a history of User 2's records, press

Lying
down

Position your wrist on a support,
cushion, or your thigh so that it is
parallel with your heart with the palm
facing up.