Oregon Scientific BPW810 - Manual (Page 18)

EN
17
INFORMATION ABOUT THE CE MARK
This device complies with the European regulations
based on the Medical Products Code, and bears the
CE mark "CE0123". The device has been quality
inspected according to EG guideline 93/42/EWG and
tested in compliance to the "EN1060-1 Non-invasive
sphygmomanometers - Part 1, General requirements"
and "EN1060-3 Non-invasive sphygmomanometers-
Part3: Supplementary requirements for
electromechanical blood pressure measuring
systems". The CE mark further indicates that this
blood pressure monitor meets the general
requirements for electronic products as regards to
resistance to electromagnetic interference.
Malfunctioning may however occur in the proximity of
extremely strong electromagnetic fields. In
accordance with the "Ordinance for Operators of
Medical Products", a technical inspection must be
carried out if this device is used for industrial or
commercial purposes.
BLOOD PRESSURE LOG BOOK
To create a log of your blood pressure history,
complete the personal information section at the top,
then enter the details (date, time, and measurements)
for each reading you take.
To plot your history, use an S (systolic), D (diastolic)
and M (mean arterial pressure) to mark the points
where each measurement falls on the chart, then
connect the points to view your history over time.