Firmware update – Oki S700 User Manual

Page 57

APPENDIX A - PRINTER PROFILE UTILITY > 57

In the left hand pane, select the required printer then click the
Add button to insert it into the right hand pane.

Select the new printer you have just transferred to the right
hand side and click the

Update button to download the profile

to the Scancopier.

When the progress bar indicates 100% you have successfully
downloaded the profile to the Scancopier.

On the S700 control panel, press the

Menu button repeatedly

until

Printer Select is visible on the LCD panel. Use the

▲/▼

keys until your new printer is visible and then press the

Select

button.

FIRMWARE UPDATE

To load new firmware into the Scancopier, carry out the following.

Download the new firmware directly to the S700 Printer Profile
Utility folder.

Click the

Update Firmware button on the Printer Profile Utility

screen, browsing if necessary to the required file.

Check that the new firmware has loaded successfully by
inspecting the firmware version on the Scancopier LCD display.
You can access this by pressing the

Select key repeatedly and

then the

All Clear key.

NOTE

If you attempt to load more than 6 printer profiles to the S700 an error
message appears. If this happens, click

OK on the error message dialog

box then select a printer you no longer require in the right hand pane
and click the

Delete button to remove it and free space, before repeating

Step 2.