Oki S700 - Manual (Page 48)

MENUS AND SETTINGS > 48
NORMAL/QUALITY KEY
This key is used to select normal copying resolution (300dpi) or high
quality (600dpi). Normal is perfectly adequate for most general
document copying. This mode is faster and uses less memory. Some
documents, however, require high resolution scanning. These are
typically photographs, documents with very small print or very thin
lines and three dimensional objects.
Press the Normal/Quality key to alternate between Normal and
Quality scanning modes.
MIXED/TEXT/PHOTO KEY
Different scanner settings are required to achieve the best results for
scanning text from those required for scanning photographs. If your
document contains both types of image, use the Mixed setting and let
the Scancopier make its own adjustments to achieve the best
compromise. Otherwise select the most appropriate setting for the
document you wish to copy.
Press the Mixed/Text/Photo key to cycle through the three choices.
COPY COUNT KEY
If you want to make multiple copies of the same document press the
Copy Count key to increment the number of copies required. You can
also change this value using the
▲/▼ keys.