Oki 10e - Manual (Page 29)

E-29
To reduce paper jams:
•
Do not fill tray above Paper Full mark.
• Use only recommended paper weight
- Tray: 16 to 28 lb. (60 to 105 g/m
2 )
- Manual feed: 16 to 32 lb (60 to 120.5 g/m 2 )
•
Do not open the cover, or remove the paper tray
during a print job.
• Do not switch paper exit paths while printing.
•
Use paper that is smooth and of high quality.
•
Store paper in its ream wrapper until you are ready
to use it, and keep it away from moisture or other
conditions that can cause it to wrinkle or curl.
• Avoid printing on both sides of the paper for more
than a few pages, or preprinted documents that
have been in a photocopier.
•
Try paper before you buy in quantity.
If a paper jam message displays, remove the jam using
the instructions that follow.
TRAY “n” INPUT JAM
!
“n” indicates the trayn umber in which the jam
occurred (standard configuration is tray 1).
1 Slide the paper tray out of the printer.
2 Remove the sheet that did not feed.