Oki 10e - Manual (Page 22)

Overview
E-22
Printer Maintenance
This Section provides the following printer maintenance
information:
• Replacing the Toner Cartridge
•
Replacing the Image Drum
•
Cleaning the LED Array
• Printing a Cleaning Page
Replacing The Toner Cartridge
Replace the toner cartridge after TONER LOW displays
on the printer’s front operator panel, or on your screen
in the Status Monitor if you have installed the printer
software. After TONER LOW displays, the printer will
print approximately 100 more sheets, then display
TONER EMPTY and stop printing. Printing will resume
when a new toner cartridge is installed.
1 You will need a new toner cartridge (OKIPAGE 10
and 12 Series Type 5 Toner Kit, Part# 52109001).
2 Open the printer cover.
3 Grasp the lock lever and pull towards the front of the
printer to unlock the cartridge. Carefully lift out
toner cartridge and discard the used toner cartridge.
!
Loose toner powder may exist. Be careful.