Oki 10e - Manual (Page 19)

E-19
5 Adjust the paper guides to the width of the media.
6 Insert the envelope
−
flap down and to the left
−
until the printer grips it.
7 Issue the print command in your software.
Selecting Envelopes
•
No windows, metal clasps, or snaps – they can
damage the image drum.
•
Paper no heavier than 28 lb.
• Sturdy construction.
•
Smooth, even surface.
•
Seams down the sides, not across the middle.
• Squared-off flaps that don’t cover the print area.
•
No self-sealing flaps.
• Always use rear output when printing envelopes.
Printing Transparencies and Adhesive
Labels
1 Pull out the rear exit extender until it locks