Oregon Scientific SE112 User Manual

Page 7

SWITCHING BETWEEN OPERATION MODES

Press MODE to switch between the five operation modes: real-time clock,

alarm clock, user profile, SMART TRAINING PROGRAM, and stopwatch.

The modes are described in the sections that follow.

You can run the SMART TRAINING PROGRAM or stopwatch in the

background as you access other modes. The icon for the mode that is

running will flash until you switch back to that mode.

CHANGING THE SETTINGS

To change the any watch setting (such as time, alarm clock, user profile, etc.)

Press MODE to switch to the desired mode.

Press and hold SET until the first setting for that mode flashes.

Press ST / SP / + to change the setting. Hold to speed through the options.

Repeat Steps 2 – 3 to change other settings for that mode.

USING THE CLOCK

USING THE REAL-TIME CLOCK

The real-time clock is the default display for the VIBRA-TRAINER PRO

watch, and tracks the time, date, month, and day of week. The clock is

programmed with a 50-year auto-calendar, which means you do not

need to reset the days of the week and dates each month.

Refer to the “Changing the Settings” section to set the real-time clock.

USING THE ALARM CLOCK

To activate the alarm, press SET while the alarm time is displayed. The

alarm

icon will display whenever the alarm is set. When the feature is activated, a beep

will sound at the designated time each day. Press any button to stop the alarm. It

will ring at the same time the next day unless you turn the feature off.

SE112_Eng(24/04)

5/14/03, 4:04 PM