Oregon Scientific SE112 User Manual
Page 4
GB
GETTING STARTED
UNPACKING THE WATCH
When you unpack your VIBRA-TRAINER PRO fitness watch, make sure
to keep all the packing materials in a safe place, in case you need to
later transport or return the product for servicing.
In the box, you will find:
Watch
Heart rate chest belt
2x CR2032
User manual
TURNING ON THE WATCH (First-time use only)
Press any button to activate the LCD Display.
BATTERIES
The VIBRA-TRAINER PRO uses two CR2032 lithium batteries – one for
the receiver watch and another for the heart rate chest belt. Both are
already installed.
When the watch battery is running low, the low battery indicator displays. The
vibration alert will not work when the battery is too low.
VIBRO will display.
When the heart rate chest belt battery is exhausted, it stops transmitting signals to
the receiver watch.
The batteries typically last one year. We highly recommend that you contact
the retailer or our customer service department if you need to replace them.
Instructions follow.
To replace the watch battery:
1.
Turn the watch over so that you are looking at the back plate.
2.
Using a small screwdriver, remove the four screws that hold the
back plate into position (Figure 1).
3
BATTERY
CR2032
User Manual
(already installed)
lithium batteries
SE112_Eng(24/04)
5/14/03, 4:04 PM
4