Outback Power Systems Hitch DOM-OBK03 - Manual (Page 5)

GPS IM
PLEMENT GUIDAN CE
®
3
Specifications
Dimensions: Inch (mm)
(A) Min. Long Drop Clearance 11.5 (292)
(B) Max. Short Drop Clearance 12.25 (311)
(C) Min. Mounting Clearance 14.25 (362)
(D) Tractor Drawbar Thick. Range 1.5 - 2.0 (38 - 51)
(E) Tractor Drawbar Width Range 2.25 - 3.25 (64 - 83)
(F) Hitch Pin Point Below Tractor 1.75 (46)
(G) Hitch Pin Point Behind Tractor 10.25 (260)
(H) Hitch Clearance Below Tractor 6.5 (165)
(I) Hitch Overall Width 21 (534)
(J) Hitch Drawbar Thickness 2.0 (51)
(K) Hitch Drawbar Width 3.0 (76)
(L) Hitch Drawbar Swing ±10.0 (±254)
(M) Hitch Pin to Rear Clevis Hole 4.0 (102)
(N) Hitch Clevis Hole Spacing 3.25 (83)
(O) Hitch Pin Hole Diameter 1.67 (42)
Weights: Lbs (Kg)
Hitch Assy. ( less mount. hardware & clevis) 220 (100)
Hitch System Shipping Weight 300 (136)
Clevis Attachment Shipping Weight 25 (11)
Hydraulic Requirements:
Single Remote Hydraulic Outlet, Continuous Duty
Flow Rate (fixed)
1.5 gpm
Pressure Range 2250 - 3000 psi
Not compatible with open-center hydraulic systems.
Electrical Requirements:
Max. Current 3.5 amp
Voltage Range 9 - 16 vdc
Capacity & Performance:
Max. Vertical Static Load 4000 lbs. (1800 kg)
Power Rating 80 - 228 h.p. (60 - 170 kW)
Left / Right Travel 20 in. (508 mm) swing
6 sec. stop to stop
Standards & Limitations:
ASAE S482 compliant drawbar extender.
Not for use on articulated 4WD or tracked tractors.
Not for use with PTO drive-line powered equipment.