beautypg.com

Timer a timer b timer c – Onkyo T-4711 User Manual

Page 19

background image

19

5. Press the a/b buttons to set the OFF time, then press the

ENTER button.
After entering the ON time, the unit will suggest an OFF time of
one hour after the entered ON time.

6. Press the a/b buttons to set the preset station number, then

press the ENTER button.

7. Turn off the power.

When the ON time has come, the timer starts playing the preset
radio broadcast. When the OFF time has come, the timer automati-
cally turns off the unit’s power. If “WeekDay” or “WeekEnd”
were selected, the power is turned on and off at the set times on the
selected days. If “Once” was selected the power is turned on and
off at the set times, then the setting is cancelled.

NOTE:
If the same time is set for the ON and the OFF times, or the WeekDay
and WeekEnd day settings are all turned off, the timer cannot be set.
(The small timer indicator goes off.).

Repeat step 2. above to turn off the function.
The indicator at the left of the display goes off.

When listening to a radio broadcast,
1. Press the TIMER “MODE” button until “Sleep Off” is dis-

played.

2. Press the ENTER button until the desired sleep time (90 to 10

in 10 minute) is set.
After the specified length of time, the power will be switched off
automatically.

To confirm the remaining time:
Press the ENTER button.

To cancel the sleep setting:
Press the ENTER button until the sleep setting is turned off (the sleep
time is not displayed).

Make sure that the clock has been set correctly before setting the
time.

After setting the timer, be sure to set the power off. When the
power is on, the timer does not activate even at the ON time.

When the power is on with the timer, the other timers do no acti-
vate at the ON time. The power will be switched off at the first
timer’s OFF time. (See figure.)

If the SLEEP is set during timer play, the power will be switched
off at the sleep timer’s OFF time.

If more than two timer settings are made at the same time, the “W.
Day” setting has the first priority and the “W. End” setting has the
second one. “Once” setting has no priority.

Turning off the timer

Setting the sleep function

Notes to timer setting

W.DAY

MODE

Remote control

TIMER

TIMER

PRESET

ENTER

Remote control

Remote control

TIMER

TIMER

PRESET

ENTER

Remote control

Remote control

5

6

7

TIMER
W.DAY

TIMER
W.DAY

Goes off

SLEEP

A

SIGNAL STRENGTH

ANTENNA

TUNED

STEREO

NARROW

AUTO

SLEEP

A

SIGNAL STRENGTH

ANTENNA

TUNED

STEREO

NARROW

AUTO

Time

TIMER A

TIMER B

TIMER C

9:00

10:00

11:00

12:00

ON

OFF

OFF

ON