Entering characters, Preset → tuning → character – Onkyo T-4711 User Manual
Page 15
15
Entering characters
The following characters can be used.
If the station you are currently listening to on the T-4711 is an RDS sta-
tion, the program service name has priority over other information.
Therefore you will not be able to enter characters for the station name.
1. Select the station you wish to name (see previous sections).
2. Press the PRESET/TUNING button until Character Mode is
selected.
With each press of the button, the mode changes one at a time in
the following sequence:
Continue pressing the PRESET/TUNING button until “PRESET”
appears on the display.
After a few seconds, “[_
]” appears on the display.
3. Use the PRESET/TUNING dial to select a character.
4. Press the MEMORY button to store the character.
Repeat the procedures 3 and 4 to store more characters. You can
store up to 8 characters in all.
When you want to leave a space between characters, press the
MEMORY button. The bar moves on to the next position.
5. Press the MEMORY button while the underline is at the
eighth character position to finish entering characters.
NOTE:
●
If you have not pressed a button for 16 seconds, the operation will
complete automatically.
●
Use the procedure mentioned above to change characters that have
already been entered.
Changing the characters while they are being entered:
Before pressing the MEMORY button to finish entering the charac-
ters, press the PRESET/TUNING button to change the flashing “_”
within the brackets to “
”. Turn the PRESET/TUNING dial to
move “
” until it is at the character that you wish to change, then
press the PRESET/TUNING button so that “_” appears. After using
the PRESET/TUNING dial to select the correct character, press the
MEMORY button to finish entering the characters.
1. After choosing the station whose characters you wish to clear,
press the PRESET/TUNING button until Character Mode is
selected.
2. When “[_
]” appears on the display, hold down the
MEMORY button and press the MODE button.
Entering new characters
Clearing all the characters stored in memory
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z !
“ & % ’ ( ) * + , - . / = ? : ; < > [ ] | @ \
0 1 2 3 4 5 6 7 8 9
1
2
3
4
5
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
HI-BLEND
AUTO
MEMORY
PRESET/
TUNING
TUNED
STEREO
NARROW
TUNED
STEREO
NARROW
PRESET / TUNING
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
IMMER
MEMORY
MODE
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
DIMMER
MEMORY
MODE
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
A
SIGNAL STRENGTH
ANTENNA
TUNED
STEREO
NARROW
PRESET
→
TUNING
→
CHARACTER
DIMMER
MEMORY
MODE
T-4711
2
3
4, 5