Onkyo T-4711 - Manual (Page 18)

18
Using the timer (for remote control only)
MODE
POWER
ENTER
TIMER/
PRESET /
Before using the timer to listen to a radio broadcast, preset the station
frequency. (See “Receiving stations” on pages 10 and 11 for details on
how to preset FM/AM stations.)
1. Press the TIMER “MODE” button until “WeekDay”, “Week-
End” or “Once” is displayed.
At this time, “On” or “Off” flashes and the corresponding indicator
on the left side of the display lights up.
2. Press the A/B buttons to set “On”.
3. Press the ENTER button.
If “Once” was selected in step 1., skip to step 4.
If “WeekDay” or “WeekEnd” were selected in step 1., enter the
day settings.
The initial settings for “WeekDay” are Monday, Tuesday,
Wednesday, Thursday and Friday and the settings for “WeekEnd”
are Saturday and Sunday.
To leave the settings as they are:
Press the ENTER button.
To change the days:
1. After three seconds, the letter for Sunday begins flashing
2. Use the a/b buttons to either make the letter light up or go off.
3. Press the ENTER button to move to the next day.
When all the settings are entered, continue to step 4.
4. Press the a/b buttons to set the ON time, then press the
ENTER button.
The initial ON time is 0:00. Enter your desired ON time.
(Continued on page 19)
Starting playing at a selected time
1
2
3
4
TIMER
W.DAY MODE
Remote control
TIMER
TIMER
PRESET
Remote control
ENTER
TIMER
W.DAY
TIMER
W.DAY
S M T W T F S
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Remote control
TIMER
TIMER
PRESET
ENTER
Remote control
Remote control
The remote control can be used to set the following four timer func-
tions.
WeekDay: For listening to the radio at a designated time on weekdays.
WeekEnd: For listening to the radio at a designated time on weekends.
Once:
For listening to the radio at a designated time one time only.
Sleep: Power off the system after a specified time period.
NOTE:
● Make sure that the clock has been set correctly before setting the
timer.
● Before setting the timer, be sure the amplifier’s volume control
and input selector are set to the desired positions.
● In order to use the timer to switch on and off other components
(such as a CD player or cassette deck), connect the components to
this unit’s AC outlets.
Refer to the Instruction Manuals of the other components for
more details on their operation.