RuggedCom RSG2300 - Manual (Page 18)

3. Installation
RuggedCom® RuggedSwitch® 18 RSG2300 Installation Guide Rev 110
Terminal
Number
Description Usage
9 Relay Common Failsafe relay common contact.
10 Relay NC Contact Normally closed, failsafe relay contact.
Table 3.1. RSG2300 Power Terminal Block Connection Description
3.2.3.1. AC Power Supply Wiring Examples RSG2300
Figure 3.15. AC Single Power Supply Wiring Example
Figure 3.16. AC Dual Redundant
Power Supply Wiring Example
• 125/230VAC rated equipment: A 250VAC appropriately rated circuit breaker must
be installed.
• Equipment must be installed according to the applicable country wiring codes.
• When equipped with two HI voltage power supplies, independent AC sources can
be used to power the product for greater redundancy.