beautypg.com

Using a headset – Radio Shack ET-1102 User Manual

Page 19

background image

19

Chain-Dialing Service Numbers

For quick recall of numbers for special
services (such as bank by phone), store
each group of numbers in its own mem-
ory location.

Dial the service’s main number first.
Then, at the appropriate place in the
call, press

MEM

and enter the number

for the location where the additional in-
formation is stored.

Testing Stored Emergency
Numbers

If you store an emergency service’s
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.

USING A HEADSET

You can make or answer calls with
hands-free convenience using an op-
tional headset that has a

3

/

32

-inch (2.5-

mm) plug. Contact your local Ra-
dioShack store for a suitable headset.

To connect the headset, pull open the
rubber cover marked

on the side of

the handset, then insert the headset’s
plug into the jack.

Notes:

• Connecting a headset disconnects

the handset’s earpiece and micro-
phone.

VOL

s or t on the handset also con-

trols the headset’s volume.

• If you place the handset on the base

to recharge it while the headset is
connected, be sure the handset
seats properly.

With a headset connected, you can
make or answer calls as usual using the
keys on the handset.

You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for greater
convenience.

When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.

43-1102.fm Page 19 Tuesday, August 17, 1999 4:37 PM