Radio Shack ET-1102 - Manual (Page 14)

14
TELEPHONE OPERATION
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and
press
TALK (the IN USE indicator on the
base lights), then dial the number. You
see the number as you dial, then (after a
few seconds) the call’s elapsed time.
Note: You can also dial the number be-
fore you press
TALK . If you make a mis-
take, repeatedly press or until the
cursor is over the incorrect digit, then
enter the correct number.
To answer a call, lift the handset from
the base and press
TALK . If auto talk is
on, just lift the handset from the base,
or, if the handset is away from the base,
press any key.
To end a call, place the handset on the
base or press
TALK .
ADJUSTING THE
HANDSET VOLUME
To adjust the volume of the sound you
hear through the handset, during a call,
press
VOL t for normal volume or VOL s
for high volume. The display shows
Volume Normal or Volume High .
USING REDIAL
You can quickly dial the last number di-
aled. Lift the handset and press
TALK ,
then press REDIAL .
Notes:
• You can also press REDIAL (so you
see the stored number) first, then
press
TALK .
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 18.
43-1102.fm Page 14 Tuesday, August 17, 1999 4:37 PM