Radio Shack ET-1102 - Manual (Page 12)

12
SETTING THE RINGER’S
VOLUME
At any time except during a call, press
VOL s or t to set the ringer volume. The
phone rings at the selected volume and
the display shows
Ringer High or
Ringer Low .
USING AUTO TALK
Your phone is preset so you must press
TALK to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and press FUNC-
TION . A menu appears with Auto
Talk selected.
2. Press SELECT to change the auto
talk setting. On or Off appears indi-
cating the selected setting.
3. To clear the display when you finish,
press FUNCTION or return the hand-
set to the base.
TURNING CALLER ID/
CALL WAITING ON/OFF
If you have Call Waiting with Caller ID
service, you can set the ET-1102 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and press FUNC-
TION .
2. Press 2 or t to select CIDCW (Caller
ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Return the handset to the base to
store the new setting.
43-1102.fm Page 12 Tuesday, August 17, 1999 4:37 PM