Radio Shack ET-2101 - Manual (Page 23)

23 Memory Dialing
DELETING A NUMBER FROM MEMORY
1. Make sure TALK is not pressed.
2. Press MEMORY then enter the memory location number of
the number to be deleted.
3. Press DELETE . ERASE MEMO? appears.
4. Press DELETE again to clear the memory. Two long beeps
sound to confirm the number is deleted successfully.
Or, press any other button to cancel the deletion. Three
short beeps sound.
CHAIN DIALING SERVICE NUMBERS
For quick recall of numbers for special services (such as alter-
nate long distance or bank by phone), store each group of num-
bers in its own memory location.
When calling special services, dial the service’s main number
first. Then, at the appropriate place in the call, press
MEMORY ,
then the number for the location where the additional numbers
are stored.
Note: If you use pulse dialing, be sure you have stored a tone
entry in another memory location (see “Using Tone Services On
a Pulse Line” on Page 19).
43-2101.fm Page 23 Wednesday, February 23, 2000 9:12 AM