Radio Shack ET-2101 - Manual (Page 10)

10 Preparation
CONNECTING THE BASE
You can power the base using the supplied 12V, 300-mA AC
adapter.
Cautions:
You must use a Class 2 power source that sup-
plies 12V DC and delivers at least 300 mA. Its
center tip must be set to positive and its plug
must fit the phone's DC12V 300mA jack. Using an adapter
that does not meet these specifications could damage the
phone or the adapter.
• Always connect the AC adapter to the base before you
connect it to AC power. When you finish, disconnect the
adapter from AC power before you disconnect it from the
base.
Follow these steps to connect the base to a phone line and AC
power.
1. Plug one end of the supplied
modular cord into the TEL LINE
jack.
2. Plug the modular cord’s other
end into a modular phone line
jack.
3. Plug the supplied AC adapter’s
barrel plug into the DC 12V
300mA .
!
TEL LINE DC 12V 300mA
43-2101.fm Page 10 Wednesday, February 23, 2000 9:12 AM