Radio Shack ET-2101 - Manual (Page 22)

22 Memory Dialing
ENTERING A PAUSE IN A MEMORY
NUMBER
In some telephone systems, you must dial an access code (9,
for example) and wait for a second dial tone before you can dial
an outside number. You can store the access code with the
phone number. However, if you do, you should also store a
pause after the access code to allow the outside line time to
connect. After entering the access code, press
REDIAL to enter
a 3-second pause.
DIALING A STORED NUMBER
Press TALK . When you hear the dial tone, press MEMORY then
the memory location number ( 1 – 0 ). The memory location num-
ber ( 01 – 10 ) appears. The phone dials the number.
Note: To dial the number in the 10th memory location, press 0 .
To pre-dial the stored number, press MEMORY then
8 8 8 8
or
9 9 9 9
to
find the desired number. Then press DIAL .
REVIEWING NUMBERS STORED IN
MEMORY
1. Press MEMORY .
2. Press
8 8 8 8
or
9 9 9 9
to scroll through 10 memory location num-
ber, or enter the memory location number on the keypad ( 0 ,
1 , 2 , and so on) to display the stored number.
43-2101.fm Page 22 Wednesday, February 23, 2000 9:12 AM