Changing the signal source, Changing the signal type, Changing – RCA Scenium HD65W20 User Manual

Page 70: System options and preferences

System Options and Preferences

Chapter 7

Changing the Signal Source

The Signal Source menu allows you to choose the source from which you would like the
signal to come: Antenna A, Antenna B, DIRECTV, or Video Inputs. The same can be
accomplished using the ANTENNA, DIRECTV, and INPUT buttons on your remote control.
If you misplace your remote control, use the front panel buttons to access this menu and
change the signal source.

To access the Signal Source menu:

Press MENU on the remote control to access the main menu.

Select System Options from the main menu.

Select Signal Source from the next menu.

Select the appropriate signal source.

Use the arrows and OK to select which source from which you would like to receive a
signal.

Changing the Signal Type

The Signal Type menu lets you choose whether you are receiving a signal from cable TV
or an off-air antenna. When you run Channel Search (see “Channel Search” in this section
for details), the TV automatically detects your signal and you don’t have to specify it here.
However, if you decide to change the source, you will need to use the Signal Type menu.
Note that when your signal source is coming from DIRECTV, this menu will not be
available.

Select whether you are receiving signals from an off-air antenna or cable.

Note that viewing a VCR
while in AIR mode may
result in poor picture
performance. If you have
a VCR connected to
Antenna A or Antenna B,
set the Signal Type to
Cable for that Antenna.