RCA Scenium HD65W20 - Manual (Page 17)

Setup and Connections
Chapter 1 13
VIDEO
AUDIO
L R
INPUT1
INPUT2
INPUT3
S-VIDEO
AUDIO
R
L
Y P
B
P
R
COMPONENT VIDEO INPUT
AUDIO OUTPUTS
FIXED VARIABLE
L R L R
EXT SPEAKERS EXT
INT
L R
+ +
To turn the TV’s internal
speakers on and off, press
MENU on the remote
control and choose Audio.
Then choose Speakers
from the menu.
INPUT 1 Lets you connect a baseband NTSC (analog) component such as a VCR,
laserdisc player, Internet access device, or DVD player.
• VIDEO provides composite video connection. The video connector is usually
yellow.
• L AUDIO provides left audio connection. The left audio connector is usually white.
• R AUDIO provides right audio connection. The right audio connector is usually
red.
• S-VIDEO lets you connect an S-Video cable for better video quality picture to a
component with S-Video capability, such as a VCR or DVD player. When using S-
Video, make sure to connect the two audio cables as well as the S-Video
connector.
INPUT 2 Provides connection to a second NTSC (analog) video component such as a
VCR or laserdisc player. Its jacks are the same as described for INPUT 1, above.
INPUT 3 Provides connection to a third NTSC (analog) video component, such as a VCR
or laserdisc. Its jacks are the same as described for INPUTS 1 and 2.
COMPONENT VIDEO INPUT Use to connect an optional component video source, such
as a DVD player. This connection provides optimum quality. Note that it is essential to
match the color coded connectors between a compatible device and the monitor.
Grey side panels protecting against screen burn-in are not always generated when
watching a 4:3 image via the COMPONENT VIDEO INPUT jacks. Therefore, limited viewing
of a 4:3 image is recommended when no side panel are present. Also note that when
watching an image via the COMPONENT VIDEO INPUT jacks, you will not be able to
manipulate the screen format.
• AUDIO R/L The audio jacks provide stereo sound. When connected, audio
volume from the main front and rear speakers is variable audio.
• Y P
B
P
R
Unlike a single video input, component video maintains the video signal
as three separate signals through these three jacks. To ensure maximum picture
quality, use three video-grade cables for the Y, P
B
, and P
R
connections.
AUDIO OUTPUTS
• FIXED L/R Provides fixed-level audio output from the television. This audio output
is ideal for audio recording or for connecting to an A/V receiver amplifier (an auxiliary
baseband component) when you want to control the volume through the A/V receiver
instead of the TV.
• VARIABLE L/R Use to connect an A/V receiver or amplifier (an auxiliary baseband
component) for variably-controlled stereo output.
• RIGHT and LEFT Speaker Terminals Use to connect external speakers for right
and left surround sound.
• INT. / EXT. (switch) INT sends audio only to the monitor’s internal speakers. EXT
sends audio to only external speakers.