RCA Scenium HD65W20 - Manual (Page 20)

Setup and Connections
16 Chapter 1
LEFT RIGHT TELEVISION
Arrange the speakers in your TV room to achieve maximum sound quality.
Connecting Speakers to the TV
You can connect up to two additional speakers to the TV: one to the RIGHT terminal, and
one to the LEFT terminal.
1. If necessary, remove the vinyl covering from the ends of the speaker wire and twist
the wire core.
When connecting the
speaker wire, make sure
you connect the positive
(+) terminal on the TV to
the positive (+) terminal
on the speaker. One side
of the speaker wire is
usually marked with a
white stripe to help you
match the terminals
correctly. If the (+) and
(-) terminals are not
matched properly, the
speakers will not be “in
phase,” causing reduction
in bass frequencies.
Do not allow the wire
core to touch other wires
or terminals. Damage to
components could result
if the cores of two wires
touch.
Speaker wire
AUDIO OUTPUTS
FIXED VARIABLE
L R L R
EXT SPEAKERS EXT
INT
L R
+ +
2. Open the lever on the speaker terminal.
3. Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).
4. Close the lever. Pull gently on the wire to see that it’s connected securely.
To turn on or off the TV’s internal speakers, press MENU on the remote control and
choose Audio. Then choose Speakers from the menu.