Roland FJ-42 - Manual (Page 55)

53
4 User's Reference
Default
value
Setting
range
Function Submenu
Top
menu
Key
HEAD
CLEANING
START
TEST
PRINT
— — This displays the [HEAD CLEANING] menu for
cleaning of the printing head. Before starting to print,
you can carry out a printing test to check the printing
quality.
You can perform cleaning while in any state. Note that
[TEST PRINT] is not displayed while the printing is in
progress.
[TEST PRINT]: Performs a printing test within an area
of approximately 54 mm (2-3/16 in.) by 18 mm (6/8
in.). If there is a problem, then continue by carrying
out cleaning from the [START] menu.
[START]: Begins cleaning of the printing heads. After
cleaning, carry out a printing test to make sure there are
no problems.
For more information, see "2-5 Test Printing" and "3-3
Cleaning the Printing Heads."
— — — — This severs the material at the present position of the
print-start line. Press this to separate the portion that
has been printed from the roll.
You cannot sever a piece of material while printing is
in progress.
For more information, see "2-7 Ending Printing
Operations -- Separating the Printed Portion."
— — — — These move the material and the carriage.
When a menu is displayed, these move among the
menu items.
— — — — This is used to accept, execute, or save the item shown
on the display.
LANGUAGE — ENGLISH
JAPANESE
ENGLISH This sets the language for screen messages. You can
select either English or Japanese.
+
— — — — This enters the menu mode.
When a menu is displayed, the [ ] and [ ] keys
move to the next menu,
the [
] moves to a submenu, and the [ ] key
moves to the previous screen.