Roland FJ-42 - Manual (Page 37)

35
2 Basic Operation
The SETUP LED goes out
If the SETUP LED is lighted, press the [SETUP] key.
Hold down for about 1 second. 1 Move the sheet loading lever toward the back of the
unit and remove the material. 2
Power Off in Daily Operation
Sheet loading lever
2 Unplug the power cord from the electrical outlet. After carrying out steps 1
to 3 in "Power Off in Daily
Operation," turn off the
main power switch. 1
When Not in Use for a Prolonged Period...
Do not switch off the main power with the printing head in an uncapped state (i.e., while the carriage is on the
platen).
If you leave the carriage uncapped for a long time, doing so may result in clogging of the printing head, making
it unusable.
Before switching off the main power, be sure to press the [POWER] key to switch off the sub power for the FJ-
52/42. NOTICE
The POWER LED goes out
3
Standby position
Carriage
Press the [POWER] key to switch off the power.
The carriage moves to the standby position and the head is capped.
If the carriage is already at the standby position, no movement takes place.
* If the unit will be out of use for a month or longer, follow steps 1 through 9 of "3-7 When Moving the Unit..." to wash the printing
heads. Head washing requires three optionally available cleaning cartridges.