Roland DIGITAL PIANO HP505 - Manual (Page 49)

Various Settings (Function Mode)
Indication Value Explanation
SaveSong
Renaming a Song (Save Song) (p. 40)
Here’s how to rename a song you’ve saved.
CopySong
Copying a Saved Song (Copy Song) (p. 42)
A song you’ve saved to the internal memory can be copied to the USB flash drive. Alternatively, a song saved to the USB flash drive can be copied to
the internal memory.
Del Song
Deleting a Saved Song (Delete Song) (p. 43)
You can delete a saved song from the internal memory or the USB flash drive.
Format
Initializing the Memory (Format Media) (p. 43)
You can delete all songs from the internal memory or a separately sold USB flash drive.
USB Drv
Changing the USB Driver Settings (USB Driver)
Normally, you don’t need to install a driver in order to connect the unit to your computer. However, if some problem occurs, or if
the performance is poor, using the Roland original driver may solve the problem.
In this case, setting “USB Drv” to “ORG” on the unit, install the driver on your personal computer.
After changing this setting, you need to turn off the unit, then turn it back on again.
MEMO
This setting is automatically saved in the unit.
For details on downloading and installing the Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
GEN
Choose this if you want to use the generic USB driver that was included with your computer. Normally, you should use this mode.
ORG Choose this if you want to use a USB driver downloaded from the Roland website.
USB Mode
Changing the USB flash drive Setting (USB Memory Mode)
In some cases, when USB flash drive is connected to the USB memory port, it may take longer for data to be loaded, or data may fail to be loaded
successfully. If this occurs, you may be able to solve the problem by changing the USB flash drive setting.
When the unit left the factory, this was set to “2” Normally, there is no need to make this setting.
MEMO
This setting is automatically saved in the unit.
1, 2
VC Mode
Controlling Video Equipment (Visual Control Mode)
Visual Control is a function that lets you control images along with your performance. If you’ve set Visual Control mode to MVC or VLNK, playing the
keyboard of unit will control the images produced by the Visual Control device connected to unit using a MIDI cable.
OFF
Visual Control is off.
MVC MIDI Visual Control mode is selected.
VLNK V-LINK mode is selected.
49
O
per
ation G
uide
Panel Descriptions
Bef
or
e
You P
la
y
Per
forming
Pr
ac
ticing
Con
venien
t F
unc
tions
A
ppendix
Func
tion M
ode