Ricoh FT 1008 - Manual (Page 57)

When appears on the copy counter:
Pull out the paper cassette and
check if paper remains in the
cassette.
l
If the paper cassette has run out of paper,
load paper. See page 18.
Remove the misfed paper com-
pletely.
l
Make sure that there are no scraps of
paper inside the copier.
If paper remains in the paper cassette and there is no misfed paper,
follow the steps below.
1) Make sure that the end plate and side plates are positioned prop-
erly to match the paper size you are using.
2) If is still displayed, change the paper type.
If the indication does not go out, call for a service representa-
tive. See the back cover of this manual for the telephone number.
59