Ricoh FT 1008 - Manual (Page 30)

Place the original for the front side
of the copy on the exposure glass
and lower the platen cover.
l
Align the center of the original to the
arrow mark on the scale.
Press the Start key to make the
first copy.
Place the original for the reverse
side of the copy on the exposure
glass and lower the platen cover.
Adjust the bypass feed guides to
the proper width.
Insert the copy paper into the
bypass feed blank side facing
upward.
l
If the paper is curled, straighten it before
insertion. (See page 48.)
Copy directions are as indicated.
31