Ricoh FT 1008 - Manual (Page 51)

52
Put the toner cassette in a vinyl
bag.
To prevent the toner from
spilling out, make sure you seal the vinyl
bag firmly.
Remove the two shipping thumb-
screws from inside the copier.
(Only short thumbscrew with type
1 model.)
Close the top unit by pressing
down firmly on the marked posi-
tion.
Attention: Make sure to press the marked
position.
Remove the sticker and insert the
two shipping thumbscrews into the
holes, then tighten them as shown.
(Only short thumbscrew with type
1 model.)
l
Make sure to insert the shipping
thumbscrews to prevent damage while
moving the copier.
Remove copy tray as shown.
First, gently lift it up
then pull
it out
Put the copier in the vinyl bag.