RCA CC543 - Manual (Page 58)

Installation
0
1
eo cable to the AUDIO
0
Attach the yellow plug on the same
end to
the VIDEO OUT jack on the
VCR (or TV monitor).
0
3 Attach the yellow plug on the other
end of the audio/video cable to the
yellow VIDEO jack and the white
plug to the white AUDIO jack on the
side of the camcorder.
0
4 Place the AV switch to IN.
Recording Op and How to Copy Tapes on the Camcorder
1. A.
on the TV and
channel you want to
te you want to copy
to see what is being
the TV and tune it to
at you normally use to
2. Press and hold the small button on the
camcorder’s POWER switch while
sliding it to CAMERA.
3. Insert a cassette in the camcorder with
the safety tab intact.
4. Press RECIPAUSE to start the
camcorder recording.
Note: If you are copying a tape, start the
VCR playing the tape.
5. Press RECIPAUSE on the camcorder
when you are finished.
Note: Make sure counter memory is
turned off. Press
to turn it off.
The recording of
other materials may infringe the rights of
49