RCA CC543 - Manual (Page 52)

Dubbing
(continued)
audio and video dubbing feature lets you record new
audio (sound) and video (picture) on a previously
tape in the camcorder.
The source for the dubbing is the camcorder’s
microphone and camera or a source connected to the
AUDIOIVIDEO jacks on the side of the camcorder.
l
To record from the camcorder’s microphone and
camera, no special connections are required.
l
To record from an external video source (VCR, laser
disc player, etc.), use the audio/video cable that came
packed with the camcorder.
and REW to locate
time. II
iewfinder when the
y to begin audio and
Note: If you are dubbing from a source
connected t o jacks, be
sure to start it playing.
A / V D U B
II
7. To begin dubbing, press
II will disappear from the viewfinder
while you are dubbing.
Press STOP/EJECT when you are
finished dubbing.
Notes: If you want to stop dubbing at a
certain point on the tape, turn on memory stop
and set the time counter to
at the
point where you want the dubbing to stop.
The camcorder will stop dubbing
automatically when it reaches
Remember, if you have dubbed from an
external source put the
A V switch
in OUT to record from the camcorder.
43