RAD Data comm ARC-101 - Manual (Page 43)

ARC-101 Installation & Operation Manual Chapter 4. Software Management
Performance Monitoring Window 4-9
T3 Link Status Window - Errors/Alarms displayed in PLCP Mode
LOS Loss of Signal
OOF Out of Frame
AIS Alarm Indication Signal
Yellow Yellow Alarm
PLCP_LOF PLCP Loss of Frame
PLCP_Yellow PLCP Yellow
A '0'' in the "Last Sec" columns of the Alarms listed above, indicates that no errors have occurred. A '1' in the
"Last Sec." column indicates that there are one or more errors in the last second. The number in the "All"
column is equal to the cumulative number of seconds in which errors occurred.
BIP Bit Interleaved Parity
FEBE Far End Block Error
P1/P2 P1/P2 Parity Error
PLCP_BIP PLCP Bit Interleaved Parity
PLCP_FEBE PLCP Far End Block Error
Link Status
E3 (Coax) last second ALL E1 (Coax/UTP) last second ALL
LOS: 0 0 LOC: 0 0
OOF: 0 0
LOC 0 0
AIS: 0 0
RDI: 0 0
BIP: 0 0
FEBE: 0 0
Example: Link Status window for ARC-101 in E3-E1 configuration