RAD Data comm ARC-101 - Manual (Page 40)

Chapter 4. Software Management ARC-101 Installation & Operation Manual
4-6 Performance Monitoring Window
4.6 Diagnostics Window
The ARC-101 can be tested and reset via the Diagnostics window. To enter
the Diagnostics window, select item number 3 in the main menu.
The Diagnostics window includes the following options:
•
General Reset
•
Modules Reset & Self-test
•
Last Self-Test Results
•
Self-test results are displayed on-screen.
DIAGNOSTICS
1. General Reset
2. Module Reset & Self-Test
3. Last Self-Test Results
ESC. Exit
Select item from the menu:
General Reset This mode enables a full test of the ARC-101. This self-test enables
checking the modules and system card, in addition to the tests performed
during the right/left module self-tests.
Modules Reset
and Self-Test A self-test can be performed on the ARC-101's modules, including the
testing of the ATM interfaces and PHY cards.
Last Self-Test
Results This option is used to monitor the self-test results.
4.7 Performance Monitoring Window
ARC-101 performance and status can be viewed via the Performance
Monitoring window. To enter the Performance Monitoring window, select
item number 4 in the main menu. The window provides an option to reset
the counters and includes two windows: