RAD Data comm ARC-101 - Manual (Page 21)

ARC-101 Installation & Operation Manual Chapter 2. Installation
ARC-101 Modules 2-5
AC Power
Connection The ARC-101's power connector is located on its rear panel
(see Figures 2-6 and Figure 2-7).
AC power should be supplied to the ARC-101 through a 1.5 m (5 ft.)
standard power cord terminated by a grounded 3-wire plug.
Warning
When applying AC power, first connect the plug of the AC cable to the
power connector on the rear panel of the ARC-101 and then to the mains
outlet.
Grounding
Warning
Interrupting the protective (grounding) conductor (inside or outside the
instrument) or disconnecting the protective earth terminal can make this
instrument dangerous. Intentional interruption of the grounding
conductor is prohibited.
Figure 2-6 ARC-101 Rear Panel (AC Version)
Figure 2-7 ARC-101 Rear Panel (DC Version)