Roland V-ACCORDION FR-7 - Manual (Page 15)

Setting up
V-Accordion r
15
Connections
The FR-7b can be used without any connections to either an amplification system or the FBC-7 power supply/battery
charger unit. An FR-5b without an optional battery needs to be connected to the supplied FBC-7, however.
Connecting the FR-7b/FR-5b to the supplied FBC-7
If you do not have a battery (FR-5b) or prefer
not to use it (FR-7b), you need to connect the
V-Accordion to the FBC-7 using the supplied
cable. That cable powers the FR-7b/FR-5b,
transmits pedal messages and sends the
FR-7b/FR-5b’s audio signals to the OUTPUT L/
MONO & R sockets on the FBC-7.
In that case, there is no real need to connect
the OUTPUT sockets on the FR-7b/FR-5b to an
external amplifier. Connect the FR-7b/FR-5b
as shown in the illustration.
Note: This connection is required if you wish to take
advantage of the FR-7b/FR-5b’s MIDI functions (see
p. 82).
Using the OUTPUT sockets
If you are using the supplied
rechargeable battery (FR-7b) and
need to connect the FR-7b/FR-5b
to a PA system or mixer, we recom-
mend using a wireless system to
avoid having to use excessively
long signal cables.
The FR-7b is equipped with an
internal speaker system and thus
does not need to be connected to
an amplifier at all. The FR-5b, on
the other hand, always requires an
audio connection. As long as it
does not contain an optional bat-
tery, we recommend connecting it
to the FBC-7 (see above).
You can also use a pair of head-
phones (Roland RH-25, RH-50 or
RH-200). In the case of the FR-7b, connecting headphones switches off the internal speakers.
Note: The FR-7b/FR-5b’s OUTPUT sockets are also available if you connect the FR-7b/FR-5b to the FBC-7. Do not try to connect them to any of
the FBC-7’s sockets, because that does not work.
4. Setting up
The FR-7b/FR-5b’s sounds have been
arranged in such a way as to provide a nat-
ural stereo image. If you connect the
V-Accordion to a mixing console, set the
PAN control of the input to which the OUT-
PUT L socket (Treble section) is connected to
“11 o’clock” and the PAN control of the
channel to which the OUTPUT R socket (Bass
& chord section) is connected to “3 o’clock”
to preserve this balance. Something like this:
. This setting can be changed,
however (see p. 73).
OUTPUT
L/MONO + R/MONO
INPUT
L + R
Use the supplied 19-pin
cable.
Note: Do not forget to connect the
FBC-7’s AC socket to a suitable wall
outlet.
T B/C
OUTPUT
L/MONO (Treble) + R/MONO (Bass) INPUT
L + R
Use either a long signal cable (10m or more) or an optional wireless system (recommended).