Renesas SDI Emulator System M32100T-EZ-E - Manual (Page 36)

( 34 / 42 )
Init dialog box of the emulator
debugger displayed
LED display of
the emulator
Chapter 6. Troubleshooting
6.1 Flowchart to Remedy Troubles
Figure 6.1 shows the flowchart to remedy troubles from when the emulator is activated until the
emulator debugger gets started. Check this while the target system is disconnected.
Figure 6.1 Flowchart to remedy troubles
Not normal
Display normal
Not normal/Error displayed
Display normal
Turning on the emulator system
Program window of the emulator debugger displayed
1. Check the operating environment etc. of the emulator
debugger.
See the emulator debugger online help.
2. Reinstall the emulator debugger.
1. Check the emulator system connections.
See, "3.2 Connecting the Target System" (page 23).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 29).
3. Restart the emulator system.