Renesas SDI Emulator System M32100T-EZ-E - Manual (Page 19)

( 17 / 42 )
Name ON/OFF
OFF
ON
OFF
Meaning
Emulator system is turned off.
Emulator system is turned on.
Emulator system is not operating normally.
1. Emulator hardware is being configured. This occurs after the emulator
is powered on until the emulator debugger gets started.
2. Emulator is in special mode (maintenance mode) for downloading
firmware. Only firmware download is executed.
Emulator system is operating normally.
Emulator is operating normally.
Firmware is being downloaded.
1. Emulator is not operating normally.
2. Emulator is in special mode (maintenance mode) for downloading
firmware. Only firmware download is executed.
Blinking
ON
OFF
Blinking
POWER
SAFE
ERROR
2.4 Name of Each Part
Here explains the name and function of each part.
(1) Names and Functions of Parts on the Upper Panel
Figure 2.2 Name of each part on the upper panel
1. System status LEDs
The system status LEDs indicate the M32100T-EZ-E emulator's power supply, firmware
operating status, etc. Table 2.1 lists the definitions of the system status LEDs.
Table 2.1 Definitions of the system status LEDs
Target status LEDs
System status LEDs
Emulator M32100T-EZ-E
ON