Renesas Emulation Pod M3062NT3-RPD-E User Manual
Old company name in catalogs and other documents
Table of contents
Document Outline
- Preface
- Contents
- Terminology
- 1. Precautions for Safety
- 2. Preparation
- 3. Setting Up
- 3.1 Removing and Closing the Upper Cover
- 3.2 Each Setting
- 3.3 Selecting Clock Supply and Replacing Oscillator Circuit Boards
- 3.4 Switch Settings
- 3.5 Installing and Removing Pullup Resistors
- 3.6 A-D Conversion Bypass Capacitors
- 3.7 Connecting the PC4701
- 3.8 Connecting the Target System
- (1) Connecting to a 100-pin LCC Socket
- (2) Connecting to an 80-pin 0.65-mm-pitch Foot Pattern (Part 1)
- (3) Connecting to an 80-pin 0.65-mm-pitch Foot Pattern (Part 2)
- (4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)
- (5) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)
- (6) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)
- (7) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1)
- (8) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2)
- (9) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3)
- (10) Connecting to a 100-pin 0.4-mm-pitch Foot Pattern
- 4. Usage
- 5. Specifications
- 6. Troubleshooting
- 7. Maintenance and Guarantee